Recessed lighting, fixtures, and ceiling fans — installed and on a permit

Recessed lights in existing ceilings, under-cabinet lighting, exterior and landscape lighting, and ceiling fans — including where there’s only a light or no box at all — throughout Clark County and southwest Washington. Dimmers and smart switches matched to the fixtures. Permitted, inspected, and warrantied for two years.

Free estimates on installs · $125 to diagnose, credited to the repair

Licensed, bonded, and insured · WA #TRUWOEL745MO

  • Licensed · bonded · insured
  • Two-year labor warranty
  • Upfront pricing
  • Evenings and weekends

Modern home at dusk with linear LED lighting outlining the gable and garage, and a lit entry

Exterior lighting that makes the house look intentional

Linear fixtures tucked into the roofline and the garage, aimed so you see the light and not the source. Nothing glaring into a bedroom window, nothing pointed at the neighbors.

Exterior runs get their own circuit, in conduit or UF where it belongs, and you pick how they switch — a timer, a photocell, or from your phone.

What’s included

  • Layout walked with you first — how many, where, and what color temperature — before anything gets cut
  • Fan-rated boxes and bracing wherever a ceiling fan goes
  • Dimmers matched to the fixtures so nothing buzzes or flickers
  • Dust contained while cutting, and holes sized to the fixture so there’s no patching
  • Permit pulled by Truworx — you don’t deal with L&I
  • L&I inspection scheduled and passed, with the paperwork left with you
  • Cleanup — packaging and old parts hauled off, floors vacuumed
  • Two-year warranty on labor

What it costs

The price is mostly labor, and labor depends on how the wire gets from the switch to the fixture. Attic above the ceiling: quick. No attic, second floor below, or a vaulted ceiling: each light takes longer because the wire has to be fished. Recessed lights are usually priced per light, so the number scales with how many you want.

Other things that move it: whether a new switch or a new circuit is needed, whether it’s a straight fixture swap or a new location, whether a fan is replacing a light (a fan-rated box has to go in), and whether you supply the fixtures or Truworx does. Permit fees are passed through at cost.

Free estimates on installs. Photos of the room and a rough count of what you’re picturing are usually enough to start.

How it goes

  • You call or text with the room and what you’re picturing. I’ll ask for photos and give you a number, or come out to lay it out with you.
  • You pick fixtures, or I supply them. I pull the permit.
  • Install day: I text when I’m on my way, protect the floors, cut, wire, and hang everything, and leave it clean.
  • L&I inspects and you get the passed permit.

Good to know

Can you add recessed lights without tearing up the ceiling?

Almost always. Modern recessed lights are thin LED wafers that only need a hole the size of the fixture, and I fish the wire through the ceiling from the switch. With an attic above, there’s no drywall work at all. Without one, I might need a small access hole or two along the way, which is far less than opening the ceiling.

Can you put a fan where there’s just a light?

Yes. The catch is that a light box isn’t rated to hold a fan, so I replace it with a fan-rated box and brace, usually from below without opening the ceiling. If the switch is a single switch, I can add a second one or set you up with a remote so the fan and light work separately.

Do I need a permit for new lights?

In Washington, adding new fixtures, new boxes, or new wiring requires an L&I permit and inspection. Swapping a fixture on an existing box in the same location generally doesn’t. I’ll tell you which yours is and pull the permit when it’s needed.

Do you supply fixtures or do I?

Either. A lot of homeowners like to pick their own from a showroom or online, and I’ll tell you what to look for so it works with the dimmer and the location. If you’d rather not, I’ll supply good-quality fixtures, recessed lights, and fans and include them in the number.

Can you install smart switches?

Yes — Lutron Caséta, Kasa, Leviton, and the like. The one thing I check first is whether the switch box has a neutral wire, since most smart switches need one and older homes often don’t have it at the switch. If there’s no neutral, there are models that work without it, and I’ll steer you to those.

Service area

Serving Brush Prairie, Vancouver, Battle Ground, Ridgefield, La Center, Kalama, Kelso, and Longview — Clark and Cowlitz counties, southwest Washington.

Lighting installation in Clark County — tell me what you’re picturing and I’ll give you a number.

Free estimates on installs · $125 to diagnose, credited to the repair

Or text (509) 565-0103 — I’ll answer between jobs.

Licensed, bonded, and insured · WA #TRUWOEL745MO