Kitchen, bath, and addition wiring — to code, on time with your contractor
Wiring for kitchen and bath remodels and additions across Clark County and southwest Washington, coordinated with your remodeler so the walls open once. Kitchen circuits, bath fans and GFCI, and panel moves or upgrades when the remodel needs them. Permitted, inspected, and warrantied for two years.
Free estimates on installs · $125 to diagnose, credited to the repair
Licensed, bonded, and insured · WA #TRUWOEL745MO
- Licensed · bonded · insured
- Two-year labor warranty
- Upfront pricing
- Evenings and weekends
What’s included
- A walkthrough with you and your contractor before demo, so outlets, lights, and switches land where you’ll actually use them
- Kitchen circuits to current code — small-appliance circuits, dedicated circuits for the range, dishwasher, disposal, microwave, and fridge
- Bath fan, GFCI protection, and lighting circuits for bathrooms
- Rough-in scheduled to your contractor’s calendar, and trim-out when the walls are closed
- Permit pulled by Truworx — you don’t deal with L&I
- L&I inspection scheduled and passed, with the paperwork left with you
- Cleanup — packaging and old parts hauled off, floors vacuumed
- Two-year warranty on labor
What it costs
Remodel wiring is priced from the plan: how many circuits, how many devices and fixtures, and how much existing wiring has to come out or be rerouted. A kitchen that keeps the same footprint costs less to wire than one where the range and sink move, because the circuits move with them.
The panel matters too. Kitchens today need more circuits than kitchens from 1985 did, and if the panel is full or small, a subpanel or a service upgrade may be part of the job. Distance from the panel to the remodel, whether the ceiling below is finished, and permit fees at cost are the rest of it.
Free estimates on installs. Send the plan or a sketch and a photo of the panel and I’ll give you a number your contractor can build the schedule around.
How it goes
- You send me the plan, or we walk it together with your contractor. You get a number and a rough schedule.
- I pull the electrical permit and line up rough-in with your contractor’s framing and demo dates.
- Rough-in: I run the wire and set boxes while the walls are open, and I meet the inspector for the rough inspection before drywall goes up.
- Trim-out: once cabinets and paint are done, I set devices, hang fixtures, connect appliances, and meet the inspector for the final.
Good to know
Do I need to upgrade my panel for a kitchen remodel?
Sometimes. Current code requires more dedicated circuits in a kitchen than older homes have — two small-appliance circuits for the counters, plus dedicated ones for the dishwasher, disposal, microwave, and fridge, and a big one for an electric range. If your panel has open slots and the capacity, no upgrade. If it’s full or you’re on a 100-amp service and adding an induction range, we’ll talk about a subpanel or a service upgrade. I can tell from a photo of the panel.
Can you work with my contractor’s schedule?
Yes, and that’s most of the job. I give your contractor the rough-in and trim-out dates I need, I show up on them, and I call for inspections so drywall isn’t waiting on me. If the schedule slides, I’d rather hear early than be a surprise on the calendar.
How many circuits does a kitchen need?
More than you’d think. Under current code a typical kitchen has at least two 20-amp circuits for the countertop outlets, and dedicated circuits for the dishwasher, disposal, microwave, and often the fridge, plus a 40- or 50-amp circuit for an electric range and separate lighting circuits. Seven to ten circuits is normal for a full remodel.
Do you do the rough-in and the finish?
Yes, both, and it’s the same person for both. Rough-in is the wire and boxes while the walls are open; finish (trim-out) is the outlets, switches, fixtures, and appliance hookups after the walls and cabinets are in. Each has its own inspection, and I’m there for both.
Who pulls the permit?
I pull the electrical permit in Truworx’s name. In Washington the electrical contractor doing the work has to be the one who pulls it, separate from your contractor’s building permit. I schedule the rough and final electrical inspections with L&I and coordinate them with your contractor’s building inspections.
Service area
Serving Brush Prairie, Vancouver, Battle Ground, Ridgefield, La Center, Kalama, Kelso, and Longview — Clark and Cowlitz counties, southwest Washington.
Remodel wiring in Clark County — send me the plan and I’ll give you a number.
Free estimates on installs · $125 to diagnose, credited to the repair
Or text (509) 565-0103 — I’ll answer between jobs.
Licensed, bonded, and insured · WA #TRUWOEL745MO
