New outlets, switches, and dedicated circuits — done right and inspected

Adding outlets where you need them, GFCI protection in kitchens, baths, garages, and outside, dedicated circuits for appliances, and replacing worn, loose, or two-prong outlets — across Clark County and southwest Washington. Permitted, inspected, and warrantied for two years.

Free estimates on installs · $125 to diagnose, credited to the repair

Licensed, bonded, and insured · WA #TRUWOEL745MO

  • Licensed · bonded · insured
  • Two-year labor warranty
  • Upfront pricing
  • Evenings and weekends

What’s included

  • Circuit checked first, so a new outlet isn’t added to one that’s already overloaded
  • GFCI or AFCI protection wherever current code requires it
  • Tamper-resistant outlets, and USB or 20-amp outlets where you want them
  • Every device tested and the cover plates straight
  • Permit pulled by Truworx — you don’t deal with L&I
  • L&I inspection scheduled and passed, with the paperwork left with you
  • Cleanup — packaging and old parts hauled off, floors vacuumed
  • Two-year warranty on labor

What it costs

Small jobs are priced per device, so a handful of replacements is quick to number. A new outlet in a new spot depends on how far the wire has to run and what it runs through — the other side of the same wall is one thing, across the room over a finished ceiling is another.

A dedicated circuit is a new breaker and a new run from the panel to the appliance, so the distance from the panel and the panel’s available space matter most. Permit fees are passed through at cost. Multiple outlets on the same visit bring the per-outlet price down.

Free estimates on installs. If an outlet is warm, sparking, or dead and you don’t know why, that’s troubleshooting — $125 to diagnose, and it comes off the repair.

How it goes

  • You call or text with what you need and where. Photos help. I’ll give you a number, or come out if the run isn’t obvious.
  • I pull the permit when the work needs one.
  • Install day: I text when I’m on my way, run the wire, set the devices, test each one, and clean up.
  • L&I inspects new circuits and you get the passed permit.

Good to know

Why do my outlets feel warm or spark?

A small blue spark when you plug in a running appliance is normal. An outlet that’s warm to the touch, sparks when nothing’s being plugged in, or has a brown or melted spot around a slot is not — the connection behind it is loose or the outlet is worn out, and it’s building heat. Stop using it and call. Finding the cause is $125 to diagnose, and it comes off the repair, which is often just a new device and a proper connection.

Can you add an outlet on the other side of the room?

Yes. The easiest way is to pull power from an existing outlet on the same circuit, as long as that circuit has capacity, and fish the wire through the wall or attic to the new spot. Where the wall is finished and there’s no attic access, I might need a small hole or two along the route. You’ll know the plan before I cut anything.

What’s a GFCI and where do I need them?

A GFCI (ground-fault circuit interrupter) is the outlet with the test and reset buttons. It cuts power in a fraction of a second if electricity starts going somewhere it shouldn’t — like through you. Current code wants GFCI protection in kitchens, bathrooms, garages, unfinished basements, laundry areas, and outdoors, and near sinks in general. Older homes often have none of it. I can add protection at the outlet or at the breaker.

Do I need a dedicated circuit for my microwave / freezer / space heater?

Often, yes. A dedicated circuit is one breaker feeding one thing. Built-in microwaves, chest freezers, and anything else that runs hard or runs all the time do best on their own circuit, and a space heater that keeps tripping the breaker is telling you the circuit it’s on is already full. Kitchen countertop circuits, laundry, and bath circuits are required to be dedicated under current code.

Can you replace two-prong outlets?

Yes, and there are two ways. If there’s a ground wire in the box or the box itself is grounded through metal conduit, I install a proper grounded three-prong outlet. If there’s no ground — common in homes wired before the 1960s — code allows a GFCI outlet in its place, labeled ‘No equipment ground.’ That protects you from shock, though it doesn’t provide a ground for surge protectors. I’ll tell you which yours is.

Service area

Serving Brush Prairie, Vancouver, Battle Ground, Ridgefield, La Center, Kalama, Kelso, and Longview — Clark and Cowlitz counties, southwest Washington.

Outlets and switches in Clark County — tell me what you need and where, and I’ll give you a number.

Free estimates on installs · $125 to diagnose, credited to the repair

Or text (509) 565-0103 — I’ll answer between jobs.

Licensed, bonded, and insured · WA #TRUWOEL745MO